1989 skidoo formula mach1, 583cc 2 stroke liquid cooled. runs and drives great, always starts easy comes with ownership and bill of sale. seat cover is rough shape but complete, has fresh flex tape on it which provides good buttt traction on snow pants. sled has had lots of work and preventative work over the last couple years, Track, sliders,idler, bearings, driveshaft with bearings and seals. feul pump, voltage regulator, headlight led, all motor mounts, belt has 5 hours on it, ski bushings, tierods, steering shaft bushing, speedo cable, hose clamps, ignition coil, carbs rebuilt, fresh coolant and chaincase oil. clutch rebuilt beautifully. what does it need? a seat cover or 2 ft flex tape to complete, should be gone over with a grease gun before winter. could use a proper alignment for the skis. I have rotated the track, all studs are accounted for as well as the track clips are good and tight. lots of life left in the track set up, does not rub heat exchanger. prime this sucker 3 times one or two pulls and away you go. if younhave read this far and motorsports is your thing I also have two good working atvs forsale that I have not listed yet. for details or any questions ask away, thank you for reading